Names And Functions Of Parts; Front Of The Server - NEC Express5800 Series User Manual

Chapter 1 General Description
4.

Names and Functions of Parts

The names and the functions of the server's parts are as follows.
4.1

Front of the Server

1 Front Bezel
A cover for protecting the front part of the server.
2 POWER Switch
A switch for turning on/off the server. Press once to turn on
the server. The LED lights green when it is on. Press it
again to turn off the server. *1
Hold down the switch for four seconds or more to forcibly
turn off the server.
*1： After OS boot, the operations when the POWER
switch be pressed depend on the OS settings.
3 DUMP Switch
A switch for collecting a memory dump.
Do not press DUMP Switch usually. If DUMP Switch is
pressed, the server stops.
4 BMC RESET Switch
A switch for resetting BMC of this server. Use the switch
only when there is a problem with BMC Management
Console (BMC).
5 POWER LED (green)
An LED for showing the power status of the server. This
LED lights green when the power is ON.
6 POWER Capping LED (green)
An LED for showing the power capping status.
7 STATUS LED 1,2(1:green 2:amber)
LEDs for showing the server status.
8 Global HDD LED 1,2(1:green 2:amber)
LEDs for showing the status of hard disk drives and an
optical disk drive.
14
15
9
10 Optical Disk Drive
11 Key Slot
12 Front Door
13 Stabilizer
14 3.5-inch Expansion Bay 2
15 3.5-inch Expansion Bay 1
Express5800/T110j-S, T110j-S (2nd-Gen) User's Guide
4. Names and Functions of Parts
1
2
3
4
5
6
7
8
9
10
11
12
13
USB Connectors (front)
Connectors for connecting USB 3.0 interface devices.
An optical disk drive for reading a CD/DVD. Either of the
following drives can be installed.
(Must install following one certainly.)
– DVD-ROM drive
– DVD SuperMULTI drive
– ODD Bay Cover
The drive provides the following: an eject button to eject
the tray; an LED that indicates the drive access; and an
eject hole to eject the tray forcibly
A slot for Bezel Lock Key. The key can lock Front Door
when a 2.5-inch HDD cage is installed.
A door for covering 2.5-inch hard disk drives.
Stabilizers for supporting the server.
A bay for installing 3.5-inch backup device or Internal
simple UPS.
A bay for installing 2.5-inch HDD cage (N8154-83F).
21