Table of Contents
Advertisement
Chapter 1 General Description
4.
Names and Functions of Parts
This section describes the names of the server parts.
4.1
Front View
(1)
(1) Front Bezel
The cover to protect the front of the server. This cover can
be locked with the provided Bezel Lock Key.
(2) Key Slot
The slot for Bezel Lock Key that is used to lock Front Bezel.
(3) LINK/ACT LED
This LED turns on when the server is connected to the
network. (See page 39.)
(3)-1: LAN connector 1
(3)-2: LAN connector 2
(3)-3: LAN connector 3
(3)-4: LAN connector 4
LEDs for LAN3 and LAN4 are lit when optional LAN riser
card is installed.
(4) Disk Access LED
This LED indicates status of internal hard disk drive.
(See page 39.)
30
(3)-1
(3)-3
(3)-2
(3)-4
(5) STATUS LED
This LED indicates the server status. (See page 38.)
(6) Unit ID (UID) LED
This LED turns on when UID Switch is pressed. Commands
from the software also cause it to turn on or flash.
(See page 39.)
(7) POWER LED
This LED indicates power status of server. (See page 37.)
Express5800/R120d-1M User's Guide
4. Names and Functions of Parts
(4)
(6)
(7)
(5)
(2)
Advertisement
Table of Contents
