Table of Contents
Advertisement
CGC 200 Operator's manual 4189340770
UK
Table 2: Configurable input functions
Configurable input function
Not used
Remote start/stop
Low fuel level warning
Low oil pressure warning
Low oil pressure shutdown
High oil temperature warning
High oil temperature shutdown
High coolant temperature shutdown
Auxiliary alarm shutdown (Emergency stop)
*You can fill in the number of the corresponding digital input configured for this function in your system.
4.1.3 Changing parameters using the front panel
To change parameters by using the front panel:
1. Press
and
2. The access code screen opens. The four-digit access code prevents unauthorised people from changing
the CGC 200 setup via the front buttons. The factory default code is 2000. To enter the access code:
1. Press
to increase the value of the digit where the cursor is blinking. You can use
crease the value.
2. Press
to move to the next digit.
3. When the cursor is on the last digit, press
opens.
3. Press
or
4. Press
to start editing the parameter.
1. Press
to increase the value of the digit where the cursor is blinking. You can use
crease the value.
2. Press
to move to the next digit.
3. When the cursor is on the last digit, press
4. After the change is entered, none of the parameter digits will blink. You can now press
to get to the next parameter you want to change.
5. When you have finished changing parameters, press
The table below lists the functions of the push-buttons in parameter setting mode.
DEIF A/S
simultaneously to go into parameter setting mode.
to get to the parameter you want to change.
Value in the controller
0
6
5
8
2
7
1
9
4
to enter the access code. The parameter list now
to enter the change.
to exit parameter setting mode.
Parameters
Digital input*
to de-
to de-
or
Page 19 of 43
Advertisement
Table of Contents
