Table of Contents
Advertisement
CGC 200 Operator's manual 4189340770
UK
List view
In List view, you can read and write all parameters from one table.
The table headings are as follows:
●
ParamID: Utility software identifier for the individual parameter
●
LCDNumber: Parameter number on the CGC 200 LCD display
●
Text: Parameter short description
●
Unit: Unit of the parameter
●
MinValue: Minimum adjustable value
●
MaxValue: Maximum adjustable value
●
Value: Current parameter value in the utility software*
●
Default: Default value for the parameter
●
Address: Modbus address for the parameter
*The utility software may have a different parameter value from that in the controller. For example, you may
have made a change and did not write the new value to the controller. The change will not be updated in the
controller until you write it to the controller. Alternatively, the parameter value may have been changed using
the controller front panel. This change will not be updated in the utility software unless the parameters are
read from the controller.
To select a parameter as a favourite parameter:
1. Double click on the parameter line in the table.
2. Click the Favorite icon (
The Favorite icon (
) on the toolbar toggles between showing all parameters and only showing favourite
parameters.
DEIF A/S
) in the dialogue box and click OK.
Using the Utility Software
Page 34 of 43
Advertisement
Table of Contents
