CGC 200 Operator's manual 4189340770
UK
2.3 LEDs
2.3.1 LED functions
The display unit has three LEDs. The lighting and status of the LEDs vary according to the situation.
The display LEDs indicate the following:
LED
Description
Power OK
Alarm LED
Mode
2.4 Display
2.4.1 Display functions
The display (dimensions 20 mm x 40 mm) shows readings and alarms. Examples, with icons, in English, are
given below.
2.4.2 Display views
You can see the genset's measured values in the views on the CGC 200 LCD display. Press
through the views.
DEIF A/S
Status
OFF
RED STEADY
OFF
RED FLASHING
OFF
RED STEADY
Example: Genset AC voltage and frequency (Hz)
Front panel, push-buttons, LEDs and
Situation
The unit is not powered up.
The power supply is within the limits.
No alarm present.
Active, non-acknowledged alarm(s) present.
The unit is in manual mode.
The unit is in auto mode.
display
to scroll
Page 8 of 43