Quantum Data 980 User Manual page 42

980 User Guide
Navigator Panel - Item
Right click on 980 Capture
Capture Listing (Status)
Page 42
Function
optional feature you have purchased. When you click on this
item, you will browse for a license key file (Qd.lic) that you have
obtained from Quantum Data Customer Support.

[Execute a] Capture
980 device. This requires that your source device is connected
to the 980 and that it is sending video.

Export Capture Data
file that resides on the 980 Manager host PC. All captured data
is zipped up into a single file.

Open [the Selected Capture]
capture into the 980 Manager for viewing and analysis. The
capture that is currently loaded has an asterisk next to it.

[Capture] Information
selected capture and the 980 used to capture the data:
o
Creation date and time of the capture.
o
Status of the capture, i.e. was it successful or were there
errors.
o
Configuration of the triggering and pre-capture filtering.
o
All information shown above for the Instrument Information.

Rename - Enables you to rename a capture file. A useful
practice might be to rename the file to include the device
tested.

Delete [a Capture]
from the 980 Manager application.

Open Folder [Containing Capture] - Opens an Explorer window
to the folder where the selected capture resides. This enables
you to access the captured data directly.

Capture Valid
successfully and all data was saved.

Capture Invalid
complete successfully but there may be some valid data.

Red text - Indicates that an error occurred and some or all of
the data is not valid.
 Yellow text – Is a warning indicating that at least some of the
- Initiates a capture on the selected
- Enables you to export a capture
- Loads the selected
- Provides information about the
- Enables you to delete a capture
- Indicates that the capture completed
- Indicates that the capture did not
Rev. B29
August 5, 2011