Quantum Data 980 User Manual page 34

980 User Guide
Menu
Page 34
Selection Function
This item will not be highlighted if you have
not selected a 980.
Provides information about the 980 that the
Information
980 Manager is currently selected. This
information includes:
o
o
o
o
o
o
o
o
o
Edit [the Enables you to edit certain information about
Instrument Entry] the 980 that you have selected. You can edit
the name and IP address.
Configure Allows you to view and set the network
[Instrument information such as the 980 IP address,
netmask and gateway IP address.
Network]
Upgrade GUI Upgrade GUI Application - Enables you to
apply an upgrade of the 980 built-in GUI. You
can download new GUI release from the
Application
Quantum Data website on the downloads
page.
Upgrade Firmware/ Upgrade Firmware/Gateware - Enables you
to apply an upgrade to the 980. You can
download new releases from the Quantum
Gateware
Data website on the downloads page.
Upgrade System Upgrade System Components - Enables you
to apply an upgrade to the 980 HDMI Source
Compliance Test application or any other
Components
optional application. You can download new
releases from the Quantum Data website on
the downloads page.
Set 980 License This enables you to activate a license for an
Key optional feature you have purchased. When
980 Name
IP address of the 980
Netmask
Gateway IP address
Hardware revisions of the 980 circuit
boards
Firmware/Gateware version of the
release applied to the 980
Serial number of the 980
OS version
Licensed options applied to the 980
Rev. B29
August 5, 2011