Quantum Data 980 User Manual page 3

980 User Guide
5.4 Monitoring the HDMI auxiliary channels in real time
6 Analyzing HDMI Protocol Data with your 980 Protocol Analyzer
6.1 Overview
6.2 Operational workflow for capturing data with your 980 Protocol Analyzer
6.3 Setting the Configuration of the Link Mode
6.4 Setting the RX HDCP mode
6.5 Setting the +5V levels
6.6 Configuring the 980 with an EDID
6.7 Viewing Incoming Video (Built-Embedded GUI only)
6.8 Using automatic triggering
6.9 Using External Triggering
6.10 Using Manual Triggering
6.11 Using Precision Trigging and Pre-Capture Filtering
6.12 Examining Captured Data
6.13 Running HDMI tests using the Pass-Through Mode
6.14 Loading or importing existing captures with the 980 Protocol Analyzer
6.15 Running HDMI tests using the Encrypted Link Analyzer
6.16 Transferring Capture Files from the 980 to a PC
7 Standard Tests
7.1 Running a video timing test
7.2 Running a video analysis test
7.3 Audio Analysis
7.4 AVmute Test
8 Audio Return Channel (HEAC) Testing
8.1 Test ARC on an HDMI source (ARC Rx)
8.2 Test ARC on an HDMI sink (ARC Tx)
9 Upgrading the 980 Manager and 980 Protocol Analyzer
10 Command Line Interface
10.1 Overview
10.2 Command Line Examples
We wish to thank Chris Pasqualino of Broadcom for his helpful suggestions and feedback during the
development of the 980 Protocol Analyzer. His help in reviewing requirements and providing
Page 3
useful feedback during alpha testing were greatly appreciated.
Rev. B29
111
116
116
116
116
117
118
120
121
124
129
129
130
134
145
152
156
165
167
167
173
180
182
186
189
191
194
195
195
197
August 5, 2011