Quantum Data 980 User Manual page 14

980 User Guide
4. After installation completes, run the new 980 Manager. It should be available in the Start Menu under All
Programs → Quantum Data, and also from an icon on your Desktop.
5. Verify that the version number in the title bar matches the version on the website
2.8.2 Powering up the 980
Use the following procedures to power up the 980 Protocol Analyzer.
1. If necessary, apply power by toggling the rocker type power switch on the back of the 980.
Note: The power switch in the front is used when you are turning off the 980 Protocol Analyzer for a short
period of time. For extended off periods, it is best to power down the 980 Protocol Analyzer by first using the
power button on the front and then the rocker switch on the back.
2. Turn the 980 on by pressing and releasing the power button on the lower portion of the front panel.
Page 14
Rev. B29
downloads page.
August 5, 2011