Manufacturer Specific Profile - Festo CPV GE-CO2-8 Series Electronic Manual

2. Commissioning

2.4.4 Manufacturer Specific Profile

Index
Designation
(hex)
3000 Condition Counter
actual value actual value
Details see Fig. 2/5
3001 Condition Counter
actual value actual value
Details see Fig. 2/5
3010 Condition Counter
nominal value nominal value
Details see Fig. 2/6
3030 Condition Status
Details see Fig. 2/7
Fig. 2/4: Summary of the indices for the Condition Counter
Festo P.BE-CP-CO2-EN en 0107NH
Condition Monitoring
The Condition Counter serves for the preventative mainten-
ance of wearing parts, necessary adjustments depending on
movement, etc.
There is a counter for each valve coil. The values are provided
in 32-bit format. You can compare the actual value automati-
cally with a specified nominal value. The comparison is not
activated until a nominal value (> 0) is entered.
Further information can be found in the following tables.
.
Map Explanation
- Valve coils of the CPV Direct (basic unit)
The values are saved continuously and remanently in The values are saved continuously and remanently in
the CPV Direct.
- Valve coils of the CP valve terminal in the extension.
The values are saved only every 15 min remanently in The values are saved only every 15 min remanently in
the CP valve terminal of the extension.
- Valve coils of the CPV Direct (basic unit)
Yes The Condition Status is set to "1" if the Condition
Counter actual value exceeds the nominal value.
2-23