Set Arming/Disarming Schedule - HIKVISION AX DS-PW32-H Series User Manual

You can link the zone to cameras. When an alarm is triggered, you can
monitor the zone via the linked cameras.
Stay/Away
If this option is Enabled the zone will be auto bypassed when the alarm
system is stay armed. To re-enable the zone deselect the option.
Chime
Enable the function and the zone will be start audible alarm when it is
triggered.
Enable Silent Zone
Enable the function and no siren will be triggered if an event or alarm
occurs.

2.5.9 Set Arming/Disarming Schedule

Set the arming/disarming schedule to arm/disarm a particular zone automatically.
Tap a security control panel to enter the control page and tap
Settings page.
Enable the auto arm/disarm function and set the auto arm time/auto disarm time.
You can also set the late to disarm time, entry delay time, exit delay time, and siren
delay time.
2.5.10 Check System Status (Zone Status/Communication Status)
AX Security Control Panel User Manual
Figure 2-6 Arming or Disarming Schedule Page
73
or to enter the