Use The Client Software; Use The Web Client - HIKVISION AX DS-PW32-H Series User Manual

1.7.1 Use the Client Software

Steps
1. Download, install and register to the client software.
2. Add device in Control Panel → Device Management → Device .
Note
Set the device port No. as 80.
Note
The user name and password when adding device are the activation user name
and password.
3. Click Remote Configuration to enter the device configuration page after the
device is completely added,

1.7.2 Use the Web Client

Steps
1. Connect the device to the Ethernet.
2. Search the device IP address via the client software and the SADP software.
3. Enter the searched IP address in the address bar.
Note
When using mobile broswer, the default IP Address is 192.168.8.1. The device
must be in the AP mode.
Note
When connectiing the network cable with computer directly, the default IP
Address is 192.0.0.64
4. Use the activation user name and password to login.
Note
Refer to Activation chapter for the details.
Communication Settings
AX Security Control Panel User Manual
16