Add Keyfob - HIKVISION AX DS-PW32-H Series User Manual

2. Tap
→ Card/Tag Management to enter the Card/Tag Management page.
3. Tap
.
4. When hearing the voice prompt "Swipe Card", you should present the card on
the control panel card presenting area.
When hearing a beep sound, the card is recognized.
5. Create a card alias and tap Finish.
Note
The alias should contain 1 to 32 characters.
The card is displayed in the Card/Tag Management page.

2.5.5 Add Keyfob

You can add keyfobs to the control panel and control partition arming/disarming
status. You can also clear alarm when an alarm is triggered.
Steps
Note
Make sure the keyfob's frequency is the same as the control panel's.
1. Tap
to enter the Add Keyfob page.
2. Follow the instruction on the page and press any key on the keyfob to add.
AX Security Control Panel User Manual
Figure 2-3 Control Panel Management Page
70