Note
The administrator has two more attempts than the configured value.
Locked Duration
Set the locking duration when the account is locked.
Note
The available locking duration is 5s to 1800s.
3. Click
to unlock the account or click Unlock All to unlock all locked users in the
list.
4. Click Save.
Module Lock Settings
Set the module locking parameters, including the Max Failure Attempts, and locked
duration. The module will be locked for the programmed time duration, once the
module authentication has failed for the amount of configured times.
Steps
1. Click System → Security → Module Lock Settings to enter the Module Lock
Settings page.
2. Select a module from the list, and click the Operationicon.
3. Set the following parameters of the selected module.
Max. Failure Attempts
If a user continuously tries to authentication a card for more than the
configured attempts permitted, the card reader will be locked for the
programmed duration.
Locked Duration
Set the locking duration when the card reader is locked. After the configured
duration, the card reader will be unlocked.
4. Click OK.
System Maintenance
You can reboot the device, restore default settings, import/export configuration file,
or upgrade the device remotely.
AX Security Control Panel User Manual
52