Use Mobile Client - HIKVISION AX DS-PW32-H Series User Manual

While the system is not armed, present a valid card to the control panel to arm the
system.
While the system is armed, present a valid card to the control panel to disarm the
system.
The card operations and responding voice prompts are shown below.
Card Operation Result
Armed with Enrolled Card
Arming Failed with Enrolled Card
Start Arming with Enrolled Card
No Arming Permission for the Enrolled
Card
Fault Checking Finished with the
Enrolled Card
Disarming with Enrolled Card
No Disarming Permission for the
Enrolled Card
Unenrolled Card Operation

2.5 Use Mobile Client

2.5.1 Add Peripheral to the Control Panel
AX Security Control Panel User Manual
Voice Prompt
Away/Stay Arming
Arming Failed
Beep in the first 5 seconds. Fault promt
after the beep for fault occurring
No Voice Prompt
No Voice Prompt
Disarmed
No Voice Prompt
Invalid access
66