Installation - HIKVISION AX DS-PW32-H Series User Manual

Control panel
Hide thumbs Also See for AX DS-PW32-H Series:
Table of Contents

Advertisement

Note
for details, refer to the chapter of Configuration-Configure via Web Client-
Alarm Settings.
Connect via Web Client
In the web client, click Wireless Device . Select a zone/relay/siren and enter
the Settings page. Input the device serial No. for connection.
Note
for details, refer to the chapter of Configuration-Configure via Web Client-
Alarm Settings.
Connect via Mobile Client
Add a control panel to the mobile client.
On the control panel settings page, Click +, scan the QR code on the wireless
device or enter the serial No. of the device.
Note
for details, refer to the chapter ofConfiguration-Configuration via Mobile
Client-Add Peripheral to the Control Panel.

1.5 Installation

Steps
1. Loosen the screw on the rear cover. Slide down the rear cover and remove it
from the control panel.
2. Insert a SIM card into the SIM card slot.
AX Security Control Panel User Manual
Figure 1-4 Remove the Rear Cover
10

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ax ds-pw32-hsrAx ds-pw32-hgrAx ds-pw32-hrAx ds-pw32-hs

Table of Contents