HIKVISION AX DS-PW32-H Series User Manual page 77

Add a control panel to the mobile client before other operations.
Steps
1. Power on the control panel.
2. Select adding type.
-
Tap → Scan QR Code to enter the Scan QR code page. Scan the QR code
on the control panel.
Note
Normally, the QR code is printed on the label sticked on the back cover of
the control panel.
-
Tap → Manual Adding to enter the Add Device page. Input the device
serial No. with the Hik-Connect Domain adding type.
3. Connect to a network.
1) Tap Connect to a Network.
2) Tap Wireless Connect on the Select Connection Type page.
3) Follow the instructions on the Turn on Hotspot page and change the control
panel to the AP mode. Tap Next.
Note
You need to remove the rear panel of the device and the AP/STA switch is on
the back of the device.
4) Select a stable Wi-Fi for the device to connect and tap Next.
Note
Make sure the device and the mobile phone are connect to the same Wi-Fi.
4. Follow the instructions on the Device's Wi-Fi page and connect the mobile
phone with the control panel via wireless connection.
AX Security Control Panel User Manual
Figure 2-2 Connect to a Network Page
68