Locking The Keyfob; Quick Arming; Arming And Disarming With The Tag Reader - HIKVISION Pyronix Enforcer 64 User Manual

Table of Contents

Advertisement

Button
Default configuration
Programmed for 'Status LED'. This displays the system status when pressed:
RED: Armed
GREEN: Disarmed
AMBER: Fault
No action.

Locking the Keyfob

All four buttons on the keyfob can be 'locked' to prevent you from accidentally pressing them.
To do this, press the two central keys together ( Ï & I ) or the two outer keys together (Î & II ).
A RED LED will flash to indicate that the fob has been locked. To unlock the keyfob press the same
two keys together again and a GREEN LED will flash to indicate that it is now unlocked. Please note
that locking the keyfob disables all LED indications.

Quick Arming

If you have chosen to program one of the keyfob buttons as 'Arm Area', you can then opt to 'quick
arm' that area. When you press the button to arm the area, the panel will begin to count down your
exit time (depending on what exit mode has been programmed by your engineer). Once this 'arming
stage' begins, press the same button on the keyfob again and the system will arm immediately.
The disarm LED on the panel will turn off and a beep will sound to signal that the system has been
armed. The RED LED on the keyfob will illuminate for a short time to confirm this.

Arming and Disarming with the Tag Reader

It is possible to arm and disarm your system using a tag wherever a reader is installed.
To lock and unlock doors using a tag reader, the door must have a magnetic lock that is connected to
the door release output on the reader.
Arming
1. Present a valid tag to the reader.
2. The GREEN LED will illuminate on the external reader (or the disarm LED on the internal reader).
3. Remove the tag.
The door will unlock.
4. Present the same tag within 10 seconds and the system will arm and the door will lock displaying
a RED LED.
Disarming
1. Present a valid tag to the reader and then remove it.
The status will be shown (the alarm symbol will illuminate to indicate that the system is armed on
the internal reader, or the RED LED on the external reader).
2. Present the same tag again within 10 seconds and the system will disarm and the door will
unlock.
Enforcer User Guide
102017855 - V01
11

Advertisement

Table of Contents
loading

Table of Contents