Operational Failure - HIKVISION AX DS-PW32-H Series User Manual

AX Security Control Panel User Manual
The panel does not enable "forced arming", and when there is a fault in the zone,
the arming will fail. Please turn on the "forced arming" enable, or restore the zone to
the normal status.
A.5 Operational Failure
A.5.1 Failed to Enter the Test Mode
Fault Description:
Failed to enable test mode, prompting "A fault in the zone".
Solution:
Zone status, alarm status or zone power is abnormal.
A.5.2 The Alarm Clearing Operation on the Panel Does Not Produce the
Alarm Clearing Report
Fault Description:
The alarm clearing operation on the panel does not produce the alarm clearing
report.
Solution:
In the absence of alarm, no report will be uploaded for arm clearing.
A.6 Mail Delivery Failure
A.6.1 Failed to Send Test Mail
Fault Description:
when configure the mail information, click "test inbox" and prompt test fails.
Solution:
Wrong configuration of mailbox parameters. Please edit the mailbox configuration
information, as shown in table 1/1.
A.6.2 Failed to Send Mail during Use
88