Connection - HIKVISION AX DS-PW32-H Series User Manual

Number Description
11 Network Interface
12 Power Interface
Function Button
The function button is on the side of the control panel.
Use the function button to add wireless devices and check the RF signal.

1.4 Connection

You can connect peripheral device to the control panel loccally, via client software,
web client, or mobile clien.
Note
Check the RF signal strentch before connection and peripheral device
installation.While the control panel is not in the configuration mode, double press
the function button, and trigger the wireless device (event alarm or tampering
alarm). you can view the RF signal strength indication on the peripheral device.
AX Security Control Panel User Manual
Figure 1-3 Function Button
8