Activation; Activate Device Via Web Browser - HIKVISION AX DS-PW32-H Series User Manual

6. Secure the rear cover to the installation position with the supplied screws.
Attach the control panel on the rear cover, and tighten the rear cover screw to
complete the installation.
Note
Blue Star: Side Opening. If you need to route the cable though the botton of
•
the panel, remove the sheet of the side opening.
Red Star: TAMPER Screw. It is compulsory to secure the TAMPER screw.
•
No adjustments are required.
•
For use within the supervised premises only.
•

1.6 Activation

In order to protect personal security and privacy and improve the network security
level, you should activate the device the first time you connect the device to a
network.
You can create an activation password to protect your device from logging in by
other persons.

1.6.1 Activate Device via Web Browser

AX Security Control Panel User Manual
Figure 1-8 Connect to the Ethernet
Figure 1-9 Complete the Installation
12