AX Security Control Panel User Manual
2 Operation Guide
2.1 Operations
You can use the client keyfob, card, client software, or mobile client to do arming,
disarming, bypass, and zone disabling.
2.2 Arming
You can use keyfob, card, client software, mobile client to arm your system.
After the arming command is sending to control panel, the sytem will check
the detector status. If the detector is in fault, you will need to choose
whether to arm the system with fault.
While the system is armed, the control panel will prompt the result in 5s,
and upload the arming report.
Figure 2-1 Arming Process
Access level of Arming
The user in level 2 or 3 has the permission to arm or partly arm the system.
62