Check Status - HIKVISION AX DS-PW32-H Series User Manual

Note
The admin and the setter cannot be deleted.

2.7.4 Check Status

After setting the zone, repeater, and other parameters, you can view their status.
Click Status. You can view the status of zone, relay, siren, battery, communication,
and repeater.
Zone: You can view the zone status, alarm status, detector battery capacity, and
•
signal strength.
Siren: You can view siren status, battery status, and signal strength.
•
Relay: You can view relay status, battery status, and signal strength.
•
Keypad: You can view linking status, battery status, and signal strength.
•
Tag Reader(Card Reader): You can view linking status, battery status, and signal
•
strength.
Battery: You can view the battery charge.
•
Communication: You can view the wired network "STATUS", Wi-Fi status, Wi-Fi
•
signal strength, cellular network status, used data, and cloud connection status.
2.8 Disarming
You can disarm the system with keyfob, card, client software, or mobile client.
Diarming Indication
The arming/disarming indicator flashes 30s while the user successfully
disarm the system through the entry/exit route.
The system will report the disarming result after the operation completed.
Entry Delay Duration
Set the entry delay duration within 45s to compliant the EN requirement.
AX Security Control Panel User Manual
83