Table of Contents
Advertisement
Panic Alarm Station User Manual
Remote Settings
In the client software, go to Control Panel → Device Management, click and select the device in the Device for Management, and
click Remote Configuration to go to Remote Configuration page.
Note
● The device should be activated the first time it is used to log in and use properly. See Activation to activate the device.
● You need to add the device to the client software before configure it. See Add Device to the Client Software.
● Get the client software from the technical support, and install the software according to the prompts.
Device Management
Add Device to the Client Software
Before You Start
Activate the device and ensure that the device is on the same subnet as the PC.
18
Advertisement
Table of Contents
