Clutch Release Cylinder Inspection; Clutch Release Cylinder Reassembly And Remounting - Suzuki DL1000 Service Manual

• Place a rag over the piston to prevent it from popping out.
• Force out the piston by using compressed air.
"
Do not use high pressure air to prevent piston dam-
age.

CLUTCH RELEASE CYLINDER INSPECTION

Inspect the clutch release cylinder bore wall for nicks, scratches
or other damage. Inspect the oil seal for damage and wear.
Inspect the piston surface for any scratches or other damage.
CLUTCH RELEASE CYLINDER REASSEM-
BLY AND REMOUNTING
Reassemble the clutch release cylinder in the reverse order of
disassembly and by taking the following steps:
"
* Wash the clutch cylinder components with fresh
brake fluid before reassembly. Never use cleaning
solvent or gasoline to wash them.
* Do not wipe the components with a rag.
* Apply brake fluid to the cylinder bore and piston to
be inserted into the bore.
, Specification and Classification: DOT 4
CHASSIS 6-79