Removal; Inspection And Disassembly - Suzuki DL1000 Service Manual

REMOVAL

• Remove the right and left brake calipers 1.
• Loosen two axle pinch bolts 2 on the right front fork leg.
"
Do not operate the brake lever while removing the cal-
ipers.
• Slightly loosen the front axle by using the special tool.
# 09944-28320: Hexagon bit 19 mm
• Raise the front wheel off the ground and support the motorcy-
cle with a jack or a wooden block.
• Remove the front axle and the front wheel.
• Remove the spacer 3.
NOTE:
After removing the front wheel, fit the calipers temporarily to the
original positions.

INSPECTION AND DISASSEMBLY

TIRE (!6-84)
BRAKE DISC (!6-62)
• Remove the brake discs.
DUST SEAL
• Inspect the dust seals lip for wear or damage. If any damages
are found, replace the dust seals with new ones.
CHASSIS 6-9