Inspection And Disassembly - Suzuki DL1000 Service Manual

Hide thumbs Also See for DL1000:

Table of Contents

• Remove the brake disc.

INSPECTION AND DISASSEMBLY

TIRE: (!6-84)

WHEEL: (!6-10 and 6-84)

Using a dial gauge, check the rear axle for runout.

If the runout exceeds the limit, replace the rear axle.

$ Axle shaft runout: Service Limit: 0.25 mm (0.010 in)

# 09900-20607: Dial gauge (1/100 mm)

09900-20701: Magnetic stand

09900-21304: V-block set (100 mm)

WHEEL DAMPER

Inspect the dampers for wear and damage.

Replace the damper if there is anything unusual.

Inspect the rear sprocket teeth for wear. If they are worn as

shown, replace the engine sprocket, rear sprocket and drive

chain as a set.

Excessive wear

Table of Contents