Suzuki DL1000 Service Manual page 157

• Pour engine oil in each oil pocket in the front and rear cylinder
heads.
#
Be sure to check the tappet clearance.
CYLINDER HEAD COVER
• Install the new gaskets ( 2, 3) to each cylinder head cover.
• Apply SUZUKI BOND "1207B" to the cam end caps of the
gaskets as shown.
, 99000-31140: SUZUKI BOND "1207B"
#
Use the new gaskets to prevent oil leakage.
• Place the cylinder head covers on each cylinder head.
• Fit the gaskets to each head cover bolt.
#
Use the new gaskets to prevent oil leakage.
• After applying engine oil to the gaskets, tighten the head
cover bolts to the specified torque.
$ Head cover bolt: 14 N·m (1.4 kgf-m, 10.0 lb-ft)
SPARK PLUG
• Install the spark plugs.
" 09930-10121: Spark plug wrench set
• Install the valve timing inspection plug 1.
ENGINE
"FRONT" "REAR"
3-111