Suzuki DL1000 Service Manual page 127

• Confirm the gearshift cam stopper movement.
• Check the neutral position.
• Install the gearshift cam stopper plate after aligning the gear-
shift cam pin A with the gearshift cam stopper plate hole B.
• Apply a small quantity of THREAD LOCK "1342" to the gear-
shift cam stopper plate bolt 1 and tighten it to the specified
torque.
% 99000-32050: THREAD LOCK "1342"
$ Gearshift cam stopper plate bolt:
• Assembly the geafshift shaft/gearshift arm.
• Install the gearshift shaft as shown.
• Install the dowel pins and gasket 2.
#
Use new gasket to prevent oil leakage.
10 N·m (1.0 kgf-m, 7.0 lb-ft)
ENGINE 3-81