Starter Relay Inspection - Suzuki DL1000 Service Manual

• Apply a small quantity of SUZUKI MOLY PASTE to the arma-
ture shaft.
. 99000-25140: SUZUKI MOLY PASTE
• Apply a small quantity of THREAD LOCK "1342" to the starter
motor housing bolts.
/ 99000-32050: THREAD LOCK "1342"
• Apply SUZUKI SUPER GREASE "A" to the O-ring.
- 99000-25030: SUZUKI SUPER GREASE "A" (USA)
99000-25010: SUZUKI SUPER GREASE "A" (Others)
• Tighten the starter motor lead wire nut to the specified torque.
0 Starter motor lend wire nut: 5 N·m (0.5 Kgf-m, 3.7 lb-ft)

STARTER RELAY INSPECTION

• Remove the seat. (!6-4)
• Disconnect the battery - lead wire from the battery.
• Remove the starter relay cover 1.
• Disconnect the starter relay coupler 2.
• Disconnect the starter motor lead wire 3, battery lead wire
4.
• Remove the starter relay 5.
ELECTRICAL SYSTEM 7-13