Clutch Release Cylinder Removal And Disassembly; Clutch Release Cylinder Inspection - Suzuki GSX-R1000 2007 Service Manual

CLUTCH RELEASE CYLINDER REMOVAL
AND DISASSEMBLY
• Drain the clutch fluid. (
• Disconnect the clutch hose by removing the union bolt .
NOTE:
Place a rag underneath the union bolt on the release cylinder to
catch any spilled brake fluid.
• Remove the clutch release cylinder .
Do not reuse the brake fluid left over from previous
servicing and stored for long periods of time.
Brake fluid, if it leaks, will interfere with safe running
and discolor painted surfaces. Check the brake hose
and hose joints for cracks and fluid leakage.
• Place a rag over the piston to prevent it from popping out.
• Force out the piston by using compressed air.
Do not use high pressure air to prevent piston dam-
age.

CLUTCH RELEASE CYLINDER INSPECTION

Inspect the clutch release cylinder bore wall for nicks, scratches
or other damage. Inspect the oil seal for damage and wear.
Inspect the piston surface for any scratches or other damage.
8-86)
CHASSIS 8-87