Suzuki DL1000 Service Manual page 113

• Rotate the oil pump by hand and check that it moves
smoothly.
• If it does not move smoothly, replace the oil pump assembly.
#
Do not attempt to disassemble the oil pump assembly.
The oil pump is available only as an assembly.
OIL PRESSURE REGULATOR
• Remove the oil pressure regulator 1.
• When installing the oil pressure regulator, apply engine oil to
the new O-ring.
Check the operation of the oil pressure regulator by pushing on
the piston with a proper bar. If the piston does not operate,
replace the oil pressure regulator with a new one.
OIL PRESSURE SWITCH
• Remove the oil pressure switch 1.
• When installing the oil pressure switch, apply SUZUKI BOND
"1215" to the thread.
$ Oil pressure switch: 14 N·m (1.4 kgf-m, 10.0 lb-ft)
+ 99000-31110: SUZUKI BOND "1215"
OIL JET
• Remove the oil gallery plug.
ENGINE 3-67