Waters 2410 Operator's Manual page 75

Viewing Parameter Values
To view the current value for a primary function parameter, press the key for the parameter
whose value you want to see. To view the current value for a secondary function
parameter, press
to view.
Changing the Sensitivity or Scale Factor
To change a value for the Sens (sensitivity) or Scale Factor:
1. Press the key for the parameter whose value you want to change.
2. Select a new value by scrolling (Sens only) or by entering the value using the
numeric keys.
3. Press Enter
refractometer beeps and returns to the previous value.
Changing the Filter Value
To change the value for the filter:
1. Press the 2nd Func
2. Press the
3. Press the
4. Press Enter
if you enter an unacceptable value, the 2410 refractometer beeps and returns to
the previous value.
Changing the Oven or Column Heater Temperature
To change the temperature settings for the oven or the external column heaters:
1. Press the 2nd Func
want to change
2. Press the
3. Enter a new temperature from the numeric keys (pressing
internal oven or column heater).
4. Press Enter
5
the 2410 refractometer beeps and returns to the previous value.
74 Using the 2410 Refractometer
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
2nd Func, then press the key for the secondary function value you want
to save the new value. If you enter an unacceptable value, the 2410
key.
Filter key to view the current value.
Filter key repeatedly to scroll to a new value.
to save the new value. If you do not press
key, then press the key for the unit whose temperature you
(Ext 1 °C, Ext 2 °C, or Int °C).
2nd Func key, then press the Set °C
to save the new temperature. If you enter an invalid temperature,
Enter within 5 seconds or
key.
Clear powers off the