Installing The 2410 Refractometer; Introduction; Major Steps In Installing The 2410 Differential Refractometer - Waters 2410 Operator's Manual

2
Installing the 2410
Refractometer
This chapter describes the procedures for selecting the site for installing the Waters 2410
Differential Refractometer, unpacking and inspecting the instrument, installing fuses, and
making fluidic connections. For information on connecting the 2410 refractometer to other
devices, see Chapter 3.

2.1 Introduction

Figure 2-1 shows the major steps in installing the Waters 2410 Differential Refractometer.
Start installation
procedure.
Select appropriate
site.
Unpack and
inspect.
Install 2410
refractometer.
Figure 2-1 Major Steps in Installing the 2410 Differential Refractometer
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Make power
connections.
Make fluidic
connections.
Make signal
connections to
other devices.
Installation
complete.
Introduction
2
31