Connecting To A Chart Recorder; Analog Output Connections To A Chart Recorder - Waters 2410 Operator's Manual

3.3.3 Connecting to a Chart Recorder

To send an analog output signal from the 2410 refractometer to a chart recorder, make the
connections shown in Table 3-6
Table 3-6 Analog Output Connections to a Chart Recorder
Chart Recorder
Connectors
Pen 1 (+)
Pen 1 (–)
Shield not used; tape back to prevent shorting.
Red
Black
+
+ – –
Y2
Y1
Chart Recorder
Connectors
Figure 3-12 Analog Output Connections to a Chart Recorder
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
and Figure 3-12.
2410 Refractometer
(Connector A)
Pin 7 Recorder Out + (red)
Pin 8 Recorder Out – (black)
Waters 2410 Refractometer
Connector A
Auto Zero +
1
Auto Zero –
2
Chassis Gnd
3
Purge In +
4
5 Purge In –
6 Chassis Gnd
Recorder Out +
7
8
Recorder Out –
9 Chassis Gnd
10 Compressed Out +
11
Compressed Out –
12
Chassis Gnd
Making Non-IEEE-488 Signal Connections
3
TP01488
53