Enable Password For Restore (Q2010G And Q2011D); Compact Flash (Q2011D) - Oracle MICROS Workstation 5A Setup Manual

Hide thumbs Also See for MICROS Workstation 5A:

Table of Contents

Workstation 5A BIOS

ODM

See Chapter 4 for more information about Workstation 5A Recovery

options.

Enable Password For Restore (Q2010g and Q2011d)

This field is not available in BIOS Version Q1000g or Q1010m.

Starting with BIOS Version Q2010g, a pre-assigned password is required

to start WINCE Factory Restore or use the optional POSReady 2009 CF

Recovery CF.

The pre-assigned password is: Quant1c0

To disable the recovery password, set this field to [Disabled], Save Settings

and Restart. MICROS recommends the password requirement remain

enabled to prevent accidental or malicious use of WINCE Factory Restore

or the CF Recovery Card.

Available in BIOS Version Q2011d or later, the Compact Flash field

provides the ability to disable the IO Panel CF Slot for security purposes.

This field is intended for WIN32 configurations only. If the Compact Flash

field to set to [Disabled] on a Windows Embedded CE 6.0 R3 unit, it will

produce a POST error "NO CF FOUND" and fail to start.

2-22

CAUTION

If the Compact Flash interface is disabled on a Windows

Embedded CE 6.0 workstation, the unit will fail to start

and produce a POST error.

Workstation 5A Setup Guide - Fourth Edition

Table of Contents

Do you have a question about the MICROS Workstation 5A and is the answer not in the manual?