Bios Q2010G Features; Bios Q2011D Features; Bios Versions Q2010G/Q2011D Known Issues - Oracle MICROS Workstation 5A Setup Manual

Hide thumbs Also See for MICROS Workstation 5A:
Table of Contents

Advertisement

BIOS Q2010g Features

The major features of BIOS Versions Q2010g and Q2011d are highlighted
below.
The 'Golden' (Final) release of the Embedded BIOS with StrongFrame
Technology (EBSF) BIOS.
Merges the Pineview M (Mobile) and Pineview D (Desktop) platforms,
previously a separate BIOS.
Fully backwards compatible with the WS5A Revision D System Board.
By default, a password is required to start Windows Embedded CE 6.0
Factory Restore or the POS Ready Recovery CF. The password requirement
can be disabled from the ODM Menu.
Fixes most boot issues associated with the USB Hard Disk. Symptoms
include failure to boot or failure to boot every other power cycle.
Fully supports the Protege Customer Display System.
Support for 512MB SO-DIMMs in Windows Embedded CE 6.0 R3.
Adds new fields to the Exit Tab: "Reload WINCE Factory Default
Settings", "Reload USB WIN32 Factory Default Settings", and "Reload
SATA WIN32 Factory Default Settings."
Adds new fields to the ODM Tab; 'WINCE Factory Restore", "USB
WIN32 Factory Restore", "SATA WIN32 Factory Restore", and "Enable
Password for Restore".
In addition to using the Recovery Button at the BIOS Splash screen, when
combined with a Revision F System Board, offers more options for starting
the recovery process. Refer to Chapter 4 for all recovery procedures.

BIOS Q2011d Features

This BIOS adds the following features to the list above:
To ensure detection of the 8G USB Hard Disk with Toshiba Flash Chip at
start up, increase polling time to 5 seconds.
Adds a new field to the ODM Tab: 'CF Interface' to disable the CF
Interface in WIN32 applications such as POSReady 2009.

BIOS Versions Q2010g/Q2011d Known Issues

Using Intel DOS Ethernet Drivers to network boot results in 'Stack
Overflow' errors. This issue is currently under investigation at Phoenix
Technologies, Inc.
When running a POSReady 2009 image prior to Version 2.0 from the USB
Hard Disk, avoid using 2G of RAM. For example, Workstation 5A P/N
400814-104 ships with POSReady 2009, 1G of RAM and 8G USB Hard
Drive.
Workstation 5A Setup Guide - Fourth Edition
Workstation 5A BIOS
The BIOS System Configuration Utility
2-5

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MICROS Workstation 5A and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Table of Contents

Save PDF