Bios Q1010M (Login And Password Required); Bios Q2010G And Q2011D - Oracle MICROS Workstation 5A Setup Manual

Installing and Operating the Workstation 5A
Workstation 5A Recovery

BIOS Q1010m (Login and Password Required)

This BIOS version, distributed through a CE Platform update to support the
SparkLan Mini-PCI WiFi Card, requires a pre-assigned login and recovery
password to continue.
• The workstation restarts, displays the Blue Splash screen, then:
•
Type M1cr0s and press [Enter].
•
Type Quant1c0 and press [Enter].
• When the login and password have been entered correctly, then:
"Factory Recovery In Progress - Please Wait..."
•
BIOS Q2010g and Q2011d (Password Required)
This BIOS version, by default, requires a pre-assigned password to
continue. The password can be disabled, but is not recommended.
• The workstation restarts, displays the Blue Splash screen, then:
•
•
"Factory Recovery In Progress - Please Wait..."
4-28
Prompts for a login:
Prompts for a password:
Windows CE Factory Restore takes from three to five minutes to
complete, then formats the CF Card. The Workstation 5A restarts
and boots to Windows CE in the out-of-box state.
Prompts for a password to continue if the feature has not been
disabled.
Type: Quant1c0 and press [Enter].
If the password is entered correctly or disabled, then:
• Windows CE Factory Restore takes from three to five minutes
to complete, then formats the CF Card. The Workstation 5A
restarts and boots to Windows CE in the out-of-box state.
Workstation 5A Setup Guide - Fourth Edition