Wince Factory Restore; Win32 Factory Restore - Oracle MICROS Workstation 5A Setup Manual

ODM Tab (BIOS Q1000g)
The Original Device Manufacturers (ODM) Special Configuration Menu tab
provides an alternate method of starting WINCE Factory Restore or CF
Recovery. A USB Keyboard is required.

WINCE Factory Restore

1. With a USB Keyboard attached, power-up the workstation with the
power button.
2. When the Blue Splash Screen appears, press the [Del] key to enter the
System Configuration Utility.
3. Navigate to the ODM Tab, Special Configuration Menu, select the
'WINCE Factory Restore' field to [Enabled].
4. Select the Exit tab then Save Settings and Restart, [Enter], and [Y] to
restart.
• The WS5A restarts, displays the Blue Splash Screen, then:
"Factory Recovery In Progress - Please Wait..."
• Windows CE Factory Restore takes from three to five minutes to
complete, then formats the CF Card. The Workstation 5A restarts
and boots to Windows CE in the 'out-of-box' condition.

Win32 Factory Restore

The primary storage device can be the USB Hard Disk or optional SATA
SSD.
1. With a USB Keyboard attached and the POSReady 2009 Recovery CF
installed in the CF Daughter Card, power-up the workstation with the
power button.
2. When the Blue Splash Screen appears, press the [Del] key to enter the
System Configuration Utility.
3. Navigate to the ODM Special Configuration Menu, and set the 'Win32
Factory Restore' field to [Enabled].
4. Select the Exit tab then Save Settings and Restart, [Enter], and [Y] to
restart the workstation.
• The workstation restarts, and boots from the Recovery CF. A series
of prompts appear, including 'Loading RAM Disk Image', followed
by a 'Starting Windows Pre-boot Environment'.
• After a brief amount of time, a Command Window appears,
followed by 'Loading Recovery Script...' Ghost32 starts.
• If the image specified in the RECOV.DAT file is present, the
transfer starts.
Workstation 5A Setup Guide - Fourth Edition
Installing and Operating the Workstation 5A
Workstation 5A Recovery
4-31