Before You Begin; Hard Drive Assembly Diagram - Avaya CallPilot 202i Manual

Before you begin

Before you replace the hard drive, review the following:
Removing the server from the switch

Hard drive assembly diagram

Follow this procedure to assemble the hard drive.
To remove the hard drive
1. Ensure that the server is hard drive assembly side down on the antistatic mat.
2. Perform the following steps:
Avaya CallPilot 202i Server Maintenance and Diagnostics
on page 80
a. Remove the four screws that fasten the hard drive to the motherboard
and set aside the four fiber washers that are between the hard drive and
the motherboard for reuse.
b. Turn the server over and slide the hard drive toward the backplane
connectors to remove it from the socket.
Before you begin
December 2010 83