Table of Contents
Advertisement
Performing hardware maintenance and mechanical assembly
What is next?
Review the procedures for installing the server and conducting diagnostic tests.
Replacing the software feature key
The software feature key (dongle) stores the unique serial number of the server. If you must
replace the 202i server, use this procedure to move the software feature key from the faulty
server to the replacement server.
Equipment required
The following equipment is required for this procedure:
• flat blade screwdriver
• tweezers
Before you begin
Before you replace the software feature key, review
page 80.
To replace the software feature key
1. Use the flat blade of the screwdriver to lift the clip that secures the software feature
2. Use the tweezers to pull the software feature key from the socket.
3. Insert the software feature key into the socket on the replacement server, lip side up.
86
Avaya CallPilot 202i Server Maintenance and Diagnostics
key to the motherboard.
Caution:
Risk of equipment damage
Ensure that you do not bend the clip so that it can no longer apply downward
pressure.
Removing the server from the switch
on
December 2010
Advertisement
Table of Contents
Troubleshooting
