Avaya 2330/4134 Troubleshooting Manual page 348

Troubleshooting a SIP Media Gateway problem
Figure 88: show dial-peer voice sample output
The dial peer configuration shows that digit stripping is enabled and forward digits is disabled.
As a solution, you must disable digit stripping or enable forward-digits all.
Dialed number not configured
If the dialed number is not configured on the Secure Router 2330/4134, the call cannot be
completed.
The following figure shows a sample output for the debug voice cc routing command
in which the dialed destination number is not found.
Figure 89: debug voice cc routing sample output
To troubleshoot this issue, display all the configured dial peers in the Secure Router 2330/4134
using the show dial-peer voice summary command:
348 Troubleshooting
Comments? infodev@avaya.com
August 2013