Ospf Show Command Options - Avaya 2330/4134 Troubleshooting Manual

Troubleshooting unicast routing
Figure 9: debug ospf route command options
For more information about the debug ospf commands for IPv4, see
options for OSPF
see Debug command options for OSPFv3 for IPv6

OSPF show command options

You can use CLI show commands to help you troubleshoot OSPF issues.
Use the following show commands for issues related to adjacency, interface, and associated
attributes, and status:
• show ip ospf interface show ipv6 ospf interface
• show ip ospf neighbor detail show ipv6 ospf neighbor detail
Use the following commands for a quick summary of the OSPF operations and configuration
on the system:
• show ip ospf show ipv6 ospf
• show ip protocols ospf show ipv6 protocols ospf
Use the following commands and related options to collect very specific information when
troubleshooting the OSPF route database: show ip ospf database show ipv6 ospf
database
The OSPF route database includes LSA information (both detailed and summary) in the
network. The following figure shows commands options for the OSPF route database for an
IPv4 network.
Figure 10: show ip ospf database command options
The summary option gives you a quick overview of the LSA types present in the system and
the network, which is a good starting point for discovering missing routes or LSAs: show ip
130 Troubleshooting
on page 136. For information about the debug ospf commands for IPv6,
Comments? infodev@avaya.com
Debug command
on page 140.
August 2013