Dumping Log Files To Another Location; Viewing Debug Output - Avaya 2330/4134 Troubleshooting Manual

Global troubleshooting tasks

Dumping log files to another location

This procedure describes the steps necessary to copy log files to another local device or send
to a network FTP or TFTP server. The options available are:
• Copying locally to another device
• Sending to a network FTP or TFTP server
Procedure steps
1. Enter the command to copy to a local device:
2. Enter the command to upload to a network location:
Table 1: Variable definition
Variable
<destaddr>
<destination>
<filename>
<ifname>
<passwd>
<source>
<username>

Viewing debug output

The Secure Router 2330/4134 CLI contains a variety of debug commands to assist in
troubleshooting the router on a feature by feature basis. Please refer to the appropriate
troubleshooting sections in this document for further details.
The debug series of commands are available at the top level of the CLI. If you cannot find the
debug commands, first verify that you are not in Configuration Mode. Refer to Avaya Secure
Router 2330/4134 — Using the Command Line Interface (NN47263-506) for more details.
28 Troubleshooting
file copy </source/filename> </destination/filename>
file upload </source/filename> <destaddr> <filename>
[interface <ifname>] [id <username>] [passwd <password>]
The network destination address.
The destination device.
The filename used.
The interface name.
The password used to authenticate on the FTP/TFTP
server.
The source device.
The username used to authenticate on the FTP/TFTP
server.
Comments? infodev@avaya.com
Value
August 2013