How To Enable / Disable Touchscreen Unlock; About Configuration Options; How To Modify Configuration Options; About The Queuedisplay Configuration Option - Magtek ExpressCard 2000 User's Installation And Operation Manual

8 - Configuration
8.7

How to Enable / Disable Touchscreen Unlock

To enable or disable the
Troubleshooting for contact information). MagTek Support Services will ask for the EC2000's serial
number (see section 6.1 Finding the Serial Number).
8.8

About Configuration Options

The EC2000 has a multitude of options that can be configured during setup to modify the behavior of the
device. Configuration options are set using the
8.9

How to Modify Configuration Options

To view or modify the current configuration options, follow these steps:
1) If the EC2000 is not already displaying the
2) Press the button to open the
Menu
3) Press the
Settings
4) Press the
Edit Config.
5) If prompted, enter the required setup passwords.
6) Press the Expand All
7) Use the scrollbar to scroll through the list of settings in the middle of the page, and locate the
configuration option you wish to view or modify in the list.
8) Select the value below the configuration option you wish to modify. The EC2000 will display the
current value in on the right side of the screen.
9) Select the value you want by selecting the displayed value and changing it.
10) Repeat for any other configuration options you wish to modify.
11) Press the Save button to save the changes you have made. The EC2000 will pop up a dialog box
reporting "The modified configuration has been saved."
12) Press the button to dismiss the dialog box.
OK
13) Press the Status button to return to the

8.9.1 About the QueueDisplay Configuration Option

Users will not be able to see or interact with queued transactions on the
the EC2000 is configured to display the transaction queue.
If the EC2000's QueueDisplay setting is True, the default
27. If QueueDisplay is False, the default
ExpressCard 2000| Instant Issuance Card Personalization System | User Installation and Operation Manual
Page 68
Case/Door button, contact MagTek Support Services (see section 9
Main Menu
button to open the
Settings Menu
button to open the
Configuration Editing
button to expand all entries in the list of settings in the middle of the page.
Status
Status
Configuration Editing
page, press the
Status
page.
page.
page.
page will look like Figure 6-2 on page
Status
page will look like Figure 6-3 on page 28.
page.
button.
Status
page.
page unless
Status