Magtek ExpressCard 2000 User's Installation And Operation Manual page 20

4 - Receiving, Unpacking, and Packing
8) Inspect the EC2000 and report any damage to your sales representative.
9) Unpack the accessories box using Figure 2-4 to make sure all accessories are included. Report any
missing items to your sales representative for replacement.
10) Locate the tubular keys, and test them both in the top access door's lock (see section 6.5 Top Access
Door Security for details). Leave the top access door open.
11) Carefully remove the three yellow beaded ties (shown in Figure 4-6 and Figure 4-7) that secure the
XY transport and the hopper transport during shipping. Pack them in the accessories box.
12) Return the empty accessories box and all packing materials to the main box, and replace the top shell.
13) Continue setup in section 5 Installation.
ExpressCard 2000| Instant Issuance Card Personalization System | User Installation and Operation Manual
Page 20
Figure 4-5 - Removing the EC2000 from the Box
Figure 4-6 - XY Transport Shipping Tie