How To Change / Reset Passwords; Changing Computer Name; Card Processing Setup; About Card Processing - Magtek ExpressCard 2000 User's Installation And Operation Manual

8 - Configuration

8.4.2 How to Change / Reset Passwords

To reset the EC2000's passwords to factory defaults (if you do not have the Administrator password),
follow these steps:
1) Determine the EC2000's serial number (see section 6.1 Finding the Serial Number).
2) Contact MagTek Support Services (see section 9 Troubleshooting for contact information).
To change any of the EC2000's passwords if you have the Administrator password, follow these steps:
1) If the EC2000 is not already displaying the
2) Press the Menu button to open the
3) Press the
Settings
4) Press the Change Pwd
5) Open the Select a Password drop-down menu and select the password you wish to change. The
EC2000 will prompt with "Enter current password X and press 'E' key."
6) Use the on-screen keypad to enter the existing password you are changing. When done, press the
button to confirm. The EC2000 will prompt with "Enter new password X and press 'E'."
7) Use the on-screen keypad to enter the new password. The new password must be between 7 and 16
characters long. When done, press the
"Enter password X again and press 'E.'"
8) Use the on-screen keypad to enter the new password again. This is to make sure the password will
be set to what you intended. When done, press the
9) The EC2000 will report "Password is changed successfully."
10) Press the button to return to the
Status
8.5

Changing Computer Name

Note: Changing the computer name will invalidate the SSL certificate, and, as a result, the
device's internal web page may no longer function. Changing the computer name can also
introduce complications receiving technical support for the device.
By default, the EC2000 computer name is based upon the device's serial number (EC-XXXXXXX). To
change the EC2000 computer name, follow these steps:
1) If the EC2000 is not already displaying the
2) Press the button to open the
Menu
3) Press the
Settings
4) Press the
Cmptr Name
5) Enter the required passwords.
6) Enter the new computer name using the onscreen keyboard, and press the
8.6

Card Processing Setup

8.6.1 About Card Processing

The EC2000 can be set up to process personalized cards from a variety of sources:

Users can use a local card issuance and personalization client, which sends transactions to the
EC2000 via SSL on the Local Area Network (LAN).
ExpressCard 2000| Instant Issuance Card Personalization System | User Installation and Operation Manual
Page 66
Main Menu
button to open the
Settings Menu
button to open the
button to confirm. The EC2000 will report prompt with
E
Status
Main Menu
button to open the
Settings Menu
button to open the
page, press the
Status
page.
page.
Change Passwords page.
button to confirm.
E
page.
page, press the
Status
page.
page.
Change Computer Name
button.
Status
button.
Status
page.
button when done.
E
E