Digi XBee S2C DigiMesh 2.4 Kit Getting Started Manual page 14

Set up your XBee devices
Optional: Add a radio module
1. Click the Add a radio module specifying the port settings button
2. In the Add radio device dialog, select the COM port for the device you want to add.
3. Click Finish.
Note An Action Required pop-up may appear requesting you to reset the device. Press the Reset
button on the Grove Development Board.
XBee TH Grove Development Board
XBee SMT Grove Development Board
XBee S2C DigiMesh 2.4 Kit Getting Started Guide
Step 3: Set up your first wireless connection
.
14