Gather Required Materials - Digi XBee S2C DigiMesh 2.4 Kit Getting Started Manual

Set up your XBee devices
Qty. Part
2 XBee DigiMesh S2C Through-Hole module (Wire
Antenna)
3 Micro USB cables
2 XBee stickers

Gather required materials

To complete the steps in this guide, you need the following items:
Description
Item
Computer One of the following operating systems:
n
n
n
System requirements:
n
n
n
USB ports:
n
Note
However, you can use two or more computers—one for each XBee module. For range
testing, we recommend a laptop.
Version 6.1.3 or later. See
XCTU
software
Windows Vista and later: USB drivers automatically install through plug-and-play.
USB
drivers
XBee S2C DigiMesh 2.4 Kit Getting Started Guide
Windows Vista/7/8 (32-bit or 64-bit versions)
Mac OS X v10.6 and higher versions (64-bit only)
Linux with KDE or GNOME window managers (32-bit or 64-bit versions)
HDD space: 500 MB minimum, 1 GB recommended
RAM memory: 2 GB minimum, 4 GB recommended
CPU: Dual-core processor minimum, Quad-core processor recommended
Three available USB ports for the XBee/XBee-PRO DigiMesh 2.4 development kit
Only one computer is required to follow along with the steps in this guide.
Download and install
Before you begin
XCTU.
8