Digi XBee S2C DigiMesh 2.4 Kit Getting Started Manual page 27

Set up your XBee devices
11. Click Add frame.
12. In the Send frames area, make sure your frame is selected.
13. In the Send a single frame area, click Send selected frame.
14. In the Frames log area, select Transmit Request and then Transmit Status to look at the
Frame details for each.
For example, select Transmit Status and scroll down in the Frame details area to see that
your Delivery status is a success.
XBee S2C DigiMesh 2.4 Kit Getting Started Guide
Step 5: Use API mode to talk to XBee modules
27